TC4420CPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | TC4420 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 18V |
| Max Output Current | 6A |
| Nominal Supply Current | 3mA |
| Power Dissipation | 730mW |
| Output Current | 6A |
| Max Supply Current | 1.5mA |
| Propagation Delay | 75 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 25 ns |
| Max Output Voltage | -25mV |
| Rise Time | 60ns |
| Fall Time (Typ) | 35 ns |
| Turn-Off Delay Time | 25 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Input Bias Current | 10μA |
| Output Peak Current Limit-Nom | 6A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 6A 6A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 3.3mm |
| Length | 9.46mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4420CPA Overview
A higher level of flexibility is provided by its 8-DIP (0.300, 7.62mm) package.A packaging method of Tube is indicated.Gate drivers is mounted in the way of Through Hole.When the supply voltage is set to 4.5V~18V, it can demonstrate its superiority.This device is designed with a N-Channel, P-Channel MOSFET gate type.In this device, temperatures must not exceed 0°C~150°C TJ.A type of Non-Inverting is used for input in this program.Initially, the configuration is composed of 8 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number TC4420.Mounting the device requires Through Hole.In the device, there are 8 pins.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED MOSFET DRIVER as Mosfet drivers interface chip.As a maximum, there is 6A limit to the output current.There are various useful electronic components in its subcategory MOSFET Drivers.The number of component pins is 8.In terms of its basis, there are 1 outputs integrated.Mosfet gate drivers supports a current output of 6A.Considering its maximum power dissipation, 730mW shows its maximum capacity to transfer and conduct power loss without overheating.Keeping the supply current at 1.5mA ensures greater stability.Mosfet gate drivers outputs 18V as voltage.You should keep the maximum output voltage at -25mV as much as possible.
TC4420CPA Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TC4420CPA Applications
There are a lot of Microchip Technology TC4420CPA gate drivers applications.
- Power factor correction (PFC) circuits
- Motor Drives
- UPS systems
- Industrial Motor Inverter - Power Tools, Robotics
- High frequency line drivers
- serial peripheral interface (SPI), I2C
- Welding
- Isolated Supplies for controller area network (CAN),
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- PCMCIA applications
