TC4420EMF713
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4420 |
| Pin Count | 8 |
| Max Output Current | 6A |
| Nominal Supply Current | 3mA |
| Max Supply Current | 1.5mA |
| Propagation Delay | 75 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 75 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 6A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 6A 6A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height Seated (Max) | 0.95mm |
| Length | 6mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
TC4420EMF713 Overview
For greater flexibility, its 8-VDFN Exposed Pad package is used.Gate drivers is package in Tape & Reel (TR) case.Gate drivers incorporates wGate driversh 1 drivers for Gate driverss configuration.Gate drivers is mounted in the way of Surface Mount.When the supply voltage is set to 4.5V~18V, it can demonstrate its superiority.N-Channel, P-Channel MOSFET is the gate type used for this design.-40°C~150°C TJ is the allowed temperature range for this device.Mosfet driver uses Non-Inverting as Mosfet drivers input type.There are 8 terminations to form the base of its configuration.You will find various related parts under the base part number TC4420.The device is mounted with Surface Mount.Mosfet driver is configured wMosfet driverh 8 pins when designing.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.There is an output current limit of 6A for this device.Several electronic components are included in its subcategory of MOSFET Drivers.The board has a total of 8 component pins.If you want a stable supply current, you should keep it at 1.5mA.
TC4420EMF713 Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
TC4420EMF713 Applications
There are a lot of Microchip Technology TC4420EMF713 gate drivers applications.
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Digitally controlled power supplies
- A/D drivers
- Broadcast equipment
- DC-DC Converters
- Industrial Power Supplies
- RGB applications
- Video amplifiers
- 3-Phase Motor Inverter Driver
- Portable Navigation Devices
