TC4420EOA713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4420 |
| Pin Count | 8 |
| Max Output Current | 6A |
| Memory Size | 768B |
| Nominal Supply Current | 3mA |
| RAM Size | 25B |
| Memory Type | EPROM |
| Power Dissipation | 470mW |
| Max Supply Current | 1.5mA |
| Propagation Delay | 75 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 75 ns |
| Watchdog Timer | Yes |
| Data Bus Width | 8b |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Core Architecture | PIC |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Max Frequency | 4MHz |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Programmable I/O | 5 |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 6A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 6A 6A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4420EOA713 Overview
There is greater flexibility with the 8-SOIC (0.154, 3.90mm Width) package.Gate drivers is package in Tape & Reel (TR) case.Configuration is based on 1 drivers.Surface Mount is the way in which it is mounted.Using a 4.5V~18V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.N-Channel, P-Channel MOSFET is the gate type used for this design.-40°C~150°C TJ is the allowed temperature range for this device.A type of Non-Inverting is used for input in this program.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.Numerous related parts can be found under its base part number TC4420.Surface Mount is the way it takes to mount the device.The pins are configured with 8 when designing the chip.Its interface IC is BUFFER OR INVERTER BASED MOSFET DRIVER.An output current as high as 6A can be achieved at maximum power.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.A board with 8 component pins is available.Its maximum power dissipation of 470mW also demonstrates its maximum ability to transfer power without overheating.Mosfet gate drivers is recommended that you keep the supply current at 1.5mA in order to achieve greater stabilMosfet gate driversy.
TC4420EOA713 Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC4420EOA713 Applications
There are a lot of Microchip Technology TC4420EOA713 gate drivers applications.
- High-speed communications
- RGB applications
- Industrial Power Supplies
- AC-DC Inverters
- serial peripheral interface (SPI), I2C
- Industrial motor drives - compact, standard, premium, servo drives
- Solar inverters
- Portable Media Players
- Isolated Gate Driver Supplies
- High power buffers
