TC4421AVPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TC4421A |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 10A |
| Nominal Supply Current | 250μA |
| Max Supply Current | 250μA |
| Propagation Delay | 49 ns |
| Input Type | Inverting |
| Turn On Delay Time | 49 ns |
| Rise Time | 34ns |
| Fall Time (Typ) | 32 ns |
| Rise / Fall Time (Typ) | 38ns 33ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Turn On Time | 0.06 μs |
| Output Peak Current Limit-Nom | 10A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 10A 10A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.06 μs |
| Height | 3.68mm |
| Length | 9.78mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4421AVPA Overview
Gate drivers provides greater flexibilGate driversy to use the 8-DIP (0.300, 7.62mm) package.Tube is the form of the package.Through Hole is the way in which it is mounted.In the absence of a 4.5V~18V supply voltage, it can demonstrate its superiority.Gate drivers is designed wGate driversh a gate type of IGBT, N-Channel, P-Channel MOSFET.-40°C~150°C TJ is the allowed temperature range for this device.Mosfet driver accepts input of type Inverting.Mosfet driver is based on 8 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number TC4421A.In this case, Through Hole indicates how the device is to be mounted.The pins are configured with 8 when designing the chip.Specification is for 12V supply voltage operation.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.As a maximum, there is 10A limit to the output current.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.A board with 8 component pins is available.Based on its basis, it integrates 1 outputs.Mosfet gate drivers is recommended to keep the supply current at 250μA to ensure greater stabilMosfet gate driversy.
TC4421AVPA Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
TC4421AVPA Applications
There are a lot of Microchip Technology TC4421AVPA gate drivers applications.
- Line drivers
- Isolated switch mode power supplies (SMPS)
- Commercial air-conditioning (CAC)
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Refrigerator
- A/D drivers
- Isolated Supplies for controller area network (CAN),
- PCMCIA applications
- Multicolor LED/laser displays
- High power buffers
