TC4421CAT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 |
| Number of Pins | 5 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.6W |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Number of Functions | 1 |
| Base Part Number | TC4421 |
| Pin Count | 3 |
| Output Voltage | 18V |
| Max Output Current | 9A |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 1.6W |
| Max Supply Current | 1.5mA |
| Propagation Delay | 60 ns |
| Input Type | Inverting |
| Turn On Delay Time | 60 ns |
| Rise Time | 75ns |
| Fall Time (Typ) | 75 ns |
| Rise / Fall Time (Typ) | 60ns 60ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.08 μs |
| Output Peak Current Limit-Nom | 9A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.08 μs |
| Height | 9.02mm |
| Length | 10.67mm |
| Width | 4.83mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4421CAT Overview
For greater flexibility, its TO-220-5 package is used.Tube represents the package.Configuration is supported by 1 drivers.It's mounted on the way to Through Hole.By using 4.5V~18V supply voltage, it is able to demonstrate its superiority.The gate type on this device is IGBT, N-Channel, P-Channel MOSFET.This device is allowed to operate in a temperature range of 0°C~150°C TJ.Mosfet driver uses Inverting as Mosfet drivers input type.Its configuration starts with 5 terminations.Numerous related parts are available for its base part number TC4421.Mounting the device requires Through Hole.The pins are configured with 5 when designing the chip.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.Mosfet driver is possible to achieve a maximum output current of 9A.Several electronic components are included in its subcategory of MOSFET Drivers.The number of component pins is 3.Its maximum power dissipation of 1.6W also demonstrates its maximum ability to transfer power without overheating.In order to ensure greater stability, it is recommended to keep the supply current at 1.5mA.18V is the output voltage.Setting the operating supply voltage to 15V is recommended.
TC4421CAT Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
5 pins
Maximum power dissipation of 1.6W
TC4421CAT Applications
There are a lot of Microchip Technology TC4421CAT gate drivers applications.
- Uninterruptible Power Supplies (UPS)
- Isolated Supplies for controller area network (CAN),
- serial peripheral interface (SPI), I2C
- Refrigerator
- Commercial and agricultural vehicles (CAV)
- Industrial Power Supplies
- A/D drivers
- Pulse transformer drivers
- DC-DC Converters
- Motor Drives
