TC4421CPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | TC4421 |
| Pin Count | 8 |
| Output Voltage | 17.975V |
| Max Output Current | 9A |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 730mW |
| Max Supply Current | 1.5mA |
| Propagation Delay | 60 ns |
| Input Type | Inverting |
| Turn On Delay Time | 60 ns |
| Rise Time | 75ns |
| Fall Time (Typ) | 75 ns |
| Rise / Fall Time (Typ) | 60ns 60ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Input Bias Current | 10μA |
| Output Peak Current Limit-Nom | 9A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 4.06mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4421CPA Overview
The 8-DIP (0.300, 7.62mm) package provides greater flexibility.Tube is the form of the package.For its configuration, it incorporates 1 drivers.In the direction of Through Hole, gate drivers is mounted.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~18V supply voltage.This gate type has a IGBT, N-Channel, P-Channel MOSFET design.This device is allowed to operate in a temperature range of 0°C~150°C TJ.The input type is Inverting.Mosfet driver is based on 8 terminations.Numerous related parts can be found under its base part number TC4421.The device is mounted using Through Hole.There are 8 pins available in the device.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 9A that can be achieved.There are various useful electronic components in its subcategory MOSFET Drivers.A total of 8 pins are available for component connections.Based on its maximum power dissipation of 730mW, it is clear that it is capable of transferring and conducting power loss without overheating.Mosfet gate drivers is recommended that you keep the supply current at 1.5mA in order to achieve greater stabilMosfet gate driversy.In this case, the voltage is 17.975V.Mosfet gate drivers is recommended that the operating supply voltage be set to 15V volts.
TC4421CPA Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TC4421CPA Applications
There are a lot of Microchip Technology TC4421CPA gate drivers applications.
- Smart Phones
- AC-DC Inverters
- High-voltage isolated DC-DC converters
- High frequency line drivers
- Solar inverters
- Automotive Applications
- DC-DC Converters
- Portable Navigation Devices
- Industrial motor drives - compact, standard, premium, servo drives
- Isolated switch mode power supplies (SMPS)
