TC4421VAT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.6W |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Number of Functions | 1 |
| Base Part Number | TC4421 |
| Pin Count | 3 |
| JESD-30 Code | R-PSFM-T5 |
| Max Output Current | 9A |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 1.6W |
| Max Supply Current | 1.5mA |
| Propagation Delay | 60 ns |
| Input Type | Inverting |
| Turn On Delay Time | 60 ns |
| Rise Time | 75ns |
| Fall Time (Typ) | 75 ns |
| Rise / Fall Time (Typ) | 60ns 60ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Input Bias Current | 10μA |
| Output Peak Current Limit-Nom | 9A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 4.826mm |
| Length | 16.51mm |
| Width | 10.668mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4421VAT Overview
There is greater flexibility with the TO-220-5 package.A packaging method of Tube is used.There are 1 drivers installed for this device.There is a mounting bracket in the way of Through Hole.Using a 4.5V~18V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.IGBT, N-Channel, P-Channel MOSFET is the gate type used for this design.In this device, temperatures must not exceed -40°C~150°C TJ.Inverting is the input type used in this program.As a result of its configuration, it contains a maximum of 5 terminations.There are various parts that can be found under its base part number TC4421.The device is mounted with Through Hole.Mosfet driver is configured wMosfet driverh 8 pins when designing.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.As a maximum, there is 9A limit to the output current.Several electronic components are included in its subcategory of MOSFET Drivers.The component has 3 pins.Using 1.6W as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.To increase stability, keep the supply current at 1.5mA.
TC4421VAT Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 1.6W
TC4421VAT Applications
There are a lot of Microchip Technology TC4421VAT gate drivers applications.
- Motor controllers
- High-voltage isolated DC-DC converters
- General Purpose 3-Phase Inverter
- Welding
- Power factor correction (PFC) circuits
- Commercial and agricultural vehicles (CAV)
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Active Clamp Flyback or Forward and Synchronous Rectifier
- A/D drivers
- Portable Media Players
