TC4422AVMF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4422A |
| Pin Count | 8 |
| Max Output Current | 10A |
| Nominal Supply Current | 150μA |
| Output Current | 9A |
| Max Supply Current | 250μA |
| Propagation Delay | 49 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 49 ns |
| Rise Time | 60ns |
| Fall Time (Typ) | 60 ns |
| Rise / Fall Time (Typ) | 38ns 33ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.06 μs |
| Output Peak Current Limit-Nom | 10A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 10A 10A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.06 μs |
| Height Seated (Max) | 0.95mm |
| Length | 6mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4422AVMF Overview
In order to increase flexibility, the package 8-VDFN Exposed Pad is used.A packaging method of Tube is indicated.There are 1 drivers installed for this device.Gate drivers is mounted in the way of Surface Mount.In the absence of a 4.5V~18V supply voltage, its superiority can be demonstrated.Gate type IGBT, N-Channel, P-Channel MOSFET has been used in its design.This device can operate at temperatures up to -40°C~150°C TJ.This program uses the input type of Non-Inverting.There are 8 terminations to form the base of its configuration.The base part number TC4422A refers to a number of related parts.Devices are mounted by Surface Mount.The pins are configured with 8 when designing the chip.The device is specifically designed to operate at 12V volts.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED MOSFET DRIVER as Mosfet drivers interface chip.In the maximum case, the output current can be 10A volts.There are several useful electronic components found in its subcategory of MOSFET Drivers.Components with 8 pins are available.The output current of this device can be set to 9A.If you want a stable supply current, you should keep it at 250μA.
TC4422AVMF Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
TC4422AVMF Applications
There are a lot of Microchip Technology TC4422AVMF gate drivers applications.
- Active Clamp Flyback or Forward and Synchronous Rectifier
- AC-DC Inverters
- Motor controllers
- Portable computers
- Isolated Supplies for Motor Control
- RGB applications
- High-voltage isolated DC-DC converters
- Smart Phones
- General Purpose 3-Phase Inverter
- Digitally controlled power supplies
