TC4422AVOA713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4422A |
| Pin Count | 8 |
| Max Output Current | 10A |
| Nominal Supply Current | 250μA |
| Max Supply Current | 250μA |
| Propagation Delay | 49 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 49 ns |
| Rise Time | 34ns |
| Fall Time (Typ) | 32 ns |
| Rise / Fall Time (Typ) | 38ns 33ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.06 μs |
| Output Peak Current Limit-Nom | 10A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 10A 10A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.06 μs |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4422AVOA713 Overview
The 8-SOIC (0.154, 3.90mm Width) package offers greater flexibility.A packaging method of Tape & Reel (TR) is used.The configuration is supported by 1 drivers.Its recommended mounting way is Surface Mount.WGate driversh a 4.5V~18V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.This gate type has a IGBT, N-Channel, P-Channel MOSFET design.In this device, temperatures must not exceed -40°C~150°C TJ.Non-Inverting is the input type used in this program.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.Numerous related parts can be found under its base part number TC4422A.The device is mounted using Surface Mount.When designing, the device is configured with 8 pins.This device operates with 12V supply voltage.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.Mosfet driver is possible to achieve a maximum output current of 10A.There are several useful electronic components found in its subcategory of MOSFET Drivers.The component has 8 pins.To maintain higher stability, the supply current should always be 250μA.
TC4422AVOA713 Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
TC4422AVOA713 Applications
There are a lot of Microchip Technology TC4422AVOA713 gate drivers applications.
- Video amplifiers
- Uninterruptible Power Supplies (UPS)
- Telecom switch mode power supplies
- Isolated Gate Driver Supplies
- High frequency line drivers
- DC-DC Converters
- Commercial air-conditioning (CAC)
- Motor Controls
- High-voltage isolated DC-DC converters
- Smart Phones
