TC4422CAT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 |
| Number of Pins | 5 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.6W |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Number of Functions | 1 |
| Base Part Number | TC4422 |
| Pin Count | 3 |
| Output Voltage | 25mV |
| Max Output Current | 9A |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 1.6W |
| Output Current | 375mA |
| Max Supply Current | 1.5mA |
| Propagation Delay | 60 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 60 ns |
| Rise Time | 75ns |
| Fall Time (Typ) | 75 ns |
| Rise / Fall Time (Typ) | 60ns 60ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Input Bias Current | 10μA |
| Turn On Time | 0.08 μs |
| Output Peak Current Limit-Nom | 9A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.08 μs |
| Height | 16.51mm |
| Length | 10.67mm |
| Width | 4.83mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4422CAT Overview
Its TO-220-5 package provides greater flexibility.A package of Tube has been used.A total of 1 drivers are integrated into its configuration.Ideally, it should be mounted in the direction of Through Hole.WGate driversh a 4.5V~18V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.Gate drivers is designed wGate driversh a IGBT, N-Channel, P-Channel MOSFET gate.This device is allowed to operate in a temperature range of 0°C~150°C TJ.The input type is Non-Inverting.The configuration starts with 5 terminations.Numerous related parts can be found under its base part number TC4422.The device is mounted using Through Hole.During design, it is configured with 5 pins.Its interface IC is BUFFER OR INVERTER BASED MOSFET DRIVER.9A is the maximum output current.There are various useful electronic components in its subcategory MOSFET Drivers.A board with 3 component pins is available.The output current of this device can be set to 375mA.Its maximum power dissipation of 1.6W also demonstrates its maximum ability to transfer power without overheating.As a precaution, make sure the supply current is kept at 1.5mA.In this case, the voltage output is 25mV.The operating supply voltage should be set at 15V.
TC4422CAT Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
5 pins
Maximum power dissipation of 1.6W
TC4422CAT Applications
There are a lot of Microchip Technology TC4422CAT gate drivers applications.
- Power factor correction (PFC) circuits
- Dual-Battery Systems
- High-speed communications
- High current laser/LED systems
- DC-DC Converters
- White Goods - Air Conditioner, Washing Machine,
- High frequency line drivers
- Multicolor LED/laser displays
- Industrial Power Supplies
- Motor controllers
