TC4422EPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | TC4422 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Lead Pitch | 2.29mm |
| Output Voltage | 18V |
| Max Output Current | 9A |
| Operating Supply Voltage | 15V |
| Row Spacing | 7.87 mm |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 730mW |
| Output Current | 9A |
| Max Supply Current | 1.5mA |
| Propagation Delay | 60 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 60 ns |
| Max Output Voltage | 25mV |
| Rise Time | 75ns |
| Fall Time (Typ) | 75 ns |
| Turn-Off Delay Time | 60 ns |
| Rise / Fall Time (Typ) | 60ns 60ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Input Bias Current | 10μA |
| Output Peak Current Limit-Nom | 9A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 4.953mm |
| Length | 10.16mm |
| Width | 7.112mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4422EPA Overview
A higher level of flexibility is provided by its 8-DIP (0.300, 7.62mm) package.A packaging method of Tube is indicated.Its recommended mounting way is Through Hole.In the absence of a 4.5V~18V supply voltage, its superiority can be demonstrated.The gate type on this device is IGBT, N-Channel, P-Channel MOSFET.There is a temperature range for this device of -40°C~150°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.The configuration is based on 8 terminations.Under its base part number TC4422, various related parts can be found.Through Hole is the way it takes to mount the device.A total of 8 pins are available on the device.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 9A that can be achieved.There are several useful electronic components within its subcategory MOSFET Drivers.The component has 8 pins.The basis of the model has 1 outputs integrated.Mosfet gate drivers supports a current output of 9A.Its maximum power dissipation of 730mW shows its power loss capacity without overheating.Mosfet gate drivers is recommended to keep the supply current at 1.5mA to ensure greater stabilMosfet gate driversy.In this case, the voltage is 18V.Mosfet gate drivers is recommended that the operating supply voltage be set to 15V.Mosfet driver ic is recommended to keep the maximum output voltage at 25mV.
TC4422EPA Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TC4422EPA Applications
There are a lot of Microchip Technology TC4422EPA gate drivers applications.
- UPS systems
- PCMCIA applications
- General Purpose 3-Phase Inverter
- White Goods - Air Conditioner, Washing Machine,
- Isolated Supplies for Motor Control
- Dual-Battery Systems
- Active filtering
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Solar inverters
