TC4422ESM
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 750mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4422 |
| Pin Count | 8 |
| Max Output Current | 9A |
| Memory Size | 3.5kB |
| Nominal Supply Current | 200μA |
| RAM Size | 128B |
| Memory Type | EPROM |
| Power Dissipation | 750mW |
| Output Current | 2A |
| Max Supply Current | 1.5mA |
| Propagation Delay | 60 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 60 ns |
| Watchdog Timer | Yes |
| Data Bus Width | 8b |
| Rise Time | 60ns |
| Fall Time (Typ) | 60 ns |
| Core Architecture | PIC |
| Rise / Fall Time (Typ) | 60ns 60ns |
| Max Frequency | 4MHz |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Programmable I/O | 13 |
| Number of Drivers | 1 |
| Input Bias Current | 10μA |
| Output Peak Current Limit-Nom | 9A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 1.98mm |
| Length | 5.26mm |
| Width | 5.25mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
TC4422ESM Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.209, 5.30mm Width) package.Gate drivers is packaged in the way of Tube.For its configuration, it incorporates 1 drivers.Surface Mount is mounted in the way of the device.In the absence of a 4.5V~18V supply voltage, it can demonstrate its superiority.Gate drivers is designed wGate driversh a gate type of IGBT, N-Channel, P-Channel MOSFET.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Non-Inverting is used as its input type.The configuration starts with 8 terminations.The base part number TC4422 refers to a number of related parts.The device is mounted with Surface Mount.There are 8 pins available in the device.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.There is a maximum output current of 9A.There are various useful electronic components in its subcategory MOSFET Drivers.The number of component pins is 8.Mosfet gate drivers supports a current output of 2A.The maximum power dissipation of 750mW shows its maximum capability to transfer and conduct power loss without overheating.In order to ensure greater stability, it is recommended to keep the supply current at 1.5mA.
TC4422ESM Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 750mW
TC4422ESM Applications
There are a lot of Microchip Technology TC4422ESM gate drivers applications.
- AC-DC Inverters
- 3-Phase Motor Inverter Driver
- serial peripheral interface (SPI), I2C
- Solar inverters
- Commercial and agricultural vehicles (CAV)
- Motor controllers
- Telecom switch mode power supplies
- Motor Controls
- Dual-Battery Systems
- LCD/LCoS/DLP portable and embedded pico projectors
