TC4422ESM713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 750mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4422 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 9A |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 750mW |
| Max Supply Current | 1.5mA |
| Propagation Delay | 60 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 60 ns |
| Rise Time | 75ns |
| Fall Time (Typ) | 75 ns |
| Rise / Fall Time (Typ) | 60ns 60ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 9A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height Seated (Max) | 2.03mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4422ESM713 Overview
For greater flexibility, its 8-SOIC (0.209, 5.30mm Width) package is used.The packaging method is indicated by Tape & Reel (TR).Configuration is supported by 1 drivers.In the direction of Surface Mount, gate drivers is mounted.A supply voltage of 4.5V~18V demonstrates its superiority.A gate type of IGBT, N-Channel, P-Channel MOSFET has been used in its design.In this device, temperatures must not exceed -40°C~150°C TJ.Non-Inverting is used as its input type.The configuration is based on 8 terminations.The base part number TC4422 refers to a number of related parts.The device is mounted using Surface Mount.In the device, there are 8 pins.Its interface IC is BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be limited to 9A.This subcategory of MOSFET Drivers has a number of useful electronic components.The board contains 8 pins for component connections.The maximum power dissipation of 750mW shows its maximum capability to transfer and conduct power loss without overheating.If you want a stable supply current, you should keep it at 1.5mA.
TC4422ESM713 Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 750mW
TC4422ESM713 Applications
There are a lot of Microchip Technology TC4422ESM713 gate drivers applications.
- Automotive Applications
- Isolated switch mode power supplies (SMPS)
- Multicolor LED/laser displays
- High power buffers
- Telecom switch mode power supplies
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Active Clamp Flyback or Forward and Synchronous Rectifier
- High-speed communications
- AC-DC Inverters
- A/D drivers
