TC4422VPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | TC4422 |
| Pin Count | 8 |
| Max Output Current | 9A |
| Memory Size | 512B |
| Nominal Supply Current | 1.5mA |
| RAM Size | 24B |
| Memory Type | EPROM |
| Power Dissipation | 730mW |
| Max Supply Current | 1.5mA |
| Propagation Delay | 60 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 60 ns |
| Watchdog Timer | Yes |
| Data Bus Width | 8b |
| Rise Time | 75ns |
| Fall Time (Typ) | 75 ns |
| Core Architecture | PIC |
| Rise / Fall Time (Typ) | 60ns 60ns |
| Max Frequency | 10MHz |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Programmable I/O | 20 |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 9A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height Seated (Max) | 4.32mm |
| Length | 9.46mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4422VPA Overview
In order to increase flexibility, the package 8-DIP (0.300, 7.62mm) is used.Tube represents the package.There are 1 drivers installed for this device.The device is mounted in the direction of Through Hole.When the supply voltage is set to 4.5V~18V, it can demonstrate its superiority.There is a gate type of IGBT, N-Channel, P-Channel MOSFET in this design.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.The input type for this program is Non-Inverting.It's configured with 8 terminations.You will find various related parts under the base part number TC4422.Mosfet driver is mounted using Through Hole.When designing, the device is configured with 8 pins.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.In the maximum case, the output current can be limited to 9A.There are various useful electronic components in its subcategory MOSFET Drivers.The number of component pins is 8.Considering its maximum power dissipation, 730mW shows its maximum capacity to transfer and conduct power loss without overheating.Mosfet gate drivers is recommended that you keep the supply current at 1.5mA in order to achieve greater stabilMosfet gate driversy.
TC4422VPA Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TC4422VPA Applications
There are a lot of Microchip Technology TC4422VPA gate drivers applications.
- Industrial Motor Inverter - Power Tools, Robotics
- A/D drivers
- AC-DC Inverters
- Isolated switch mode power supplies (SMPS)
- Digitally controlled power supplies
- Industrial Power Supplies
- Head-up and Head mounted displays
- Pulse transformer drivers
- RGB applications
- Power factor correction (PFC) circuits
