TC4423AVMF713
| Parameters | |
|---|---|
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4423A |
| Pin Count | 8 |
| Max Output Current | 4.5A |
| Nominal Supply Current | 1mA |
| Max Supply Current | 2mA |
| Propagation Delay | 48 ns |
| Input Type | Inverting |
| Turn On Delay Time | 48 ns |
| Rise Time | 21ns |
| Fall Time (Typ) | 21 ns |
| Rise / Fall Time (Typ) | 12ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4.5A 4.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height Seated (Max) | 0.95mm |
| Length | 6mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
TC4423AVMF713 Overview
In order to increase flexibility, the package 8-VDFN Exposed Pad is used.Gate drivers is packaged in the way of Tape & Reel (TR).For its configuration, it incorporates 2 drivers.Its recommended mounting way is Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~18V supply voltage.Gate type N-Channel, P-Channel MOSFET has been used in its design.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.This program uses the input type of Inverting.As a result of its configuration, it contains a maximum of 8 terminations.There are various parts that can be found under its base part number TC4423A.The device is mounted using Surface Mount.A total of 8 pins are available on the device.Mosfet driver is designed specifically to run on 5V volts of power.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.There is an output current limit of 4.5A for this device.Within this subcategory of MOSFET Drivers, there are several useful electronic components.The board has a total of 8 component pins.If you want a stable supply current, you should keep it at 2mA.
TC4423AVMF713 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
TC4423AVMF713 Applications
There are a lot of Microchip Technology TC4423AVMF713 gate drivers applications.
- Isolated Supplies for controller area network (CAN),
- Refrigerator
- Isolated switch mode power supplies (SMPS)
- Pulse transformer drivers
- Portable Media Players
- Motor controllers
- High-voltage isolated DC-DC converters
- Digitally controlled power supplies
- DC-DC Converters
- Commercial air-conditioning (CAC)
