TC4423AVPA
| Parameters | |
|---|---|
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TC4423A |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 4.5A |
| Nominal Supply Current | 250μA |
| Power Dissipation | 1.2W |
| Max Supply Current | 2mA |
| Propagation Delay | 48 ns |
| Input Type | Inverting |
| Turn On Delay Time | 48 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 12ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4.5A 4.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 4.95mm |
| Length | 10.16mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
TC4423AVPA Overview
In order to increase flexibility, the package 8-DIP (0.300, 7.62mm) is used.There is a package in the form of Tube.Through Hole is mounted in the way of the device.When the supply voltage is 4.5V~18V it is able to demonstrate its superiority.This device is designed with a N-Channel, P-Channel MOSFET gate type.This device allows temperatures in the range of -40°C~150°C TJ.Inverting is the input type used in this program.Its configuration is based on a total of 8 terminations.There are numerous related parts listed under its base part number TC4423A.Devices are mounted by Through Hole.As a result, it is configured with 8 pins when it is designed.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 5V.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be limited to 4.5A.There are several useful electronic components within its subcategory MOSFET Drivers.There are 8 component pins on the board.Mosfet driver has been integrated wMosfet driverh a total of 2 outputs for Mosfet drivers basis.According to its maximum power dissipation, 730mW is capable of conducting and transferring a large amount of power without overheating.For higher stability, the supply current should be kept at 2mA.
TC4423AVPA Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TC4423AVPA Applications
There are a lot of Microchip Technology TC4423AVPA gate drivers applications.
- General Purpose 3-Phase Inverter
- Topologies
- High power buffers
- LCD/LCoS/DLP portable and embedded pico projectors
- Refrigerator
- Commercial and agricultural vehicles (CAV)
- Motor Drives
- UPS systems
- Isolated Supplies for controller area network (CAN),
- 3-Phase Motor Inverter Driver
