TC4423CPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Base Part Number | TC4423 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 18V |
| Max Output Current | 3A |
| Nominal Supply Current | 2.5mA |
| Power Dissipation | 730mW |
| Output Current | 3A |
| Max Supply Current | 2.5mA |
| Propagation Delay | 75 ns |
| Input Type | Inverting |
| Turn On Delay Time | 75 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 23ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Input Bias Current | 10μA |
| Turn On Time | 0.1 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.1 μs |
| Height | 3.683mm |
| Length | 9.779mm |
| Width | 6.604mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4423CPA Overview
Gate drivers provides greater flexibilGate driversy to use the 8-DIP (0.300, 7.62mm) package.A packaging method of Tube is indicated.In the direction of Through Hole, gate drivers is mounted.In the absence of a power supply voltage of 4.5V~18V V, it is able to demonstrate its superiority.A gate type of N-Channel, P-Channel MOSFET is used in its design.This device allows temperatures in the range of 0°C~150°C TJ.Mosfet driver uses Inverting as Mosfet drivers input type.Initially, the configuration is composed of 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number TC4423.The mount method is Through Hole.A total of 8 pins are available on the device.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.As a maximum, there is 3A limit to the output current.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.There are 8 component pins on the board.Mosfet driver is based on a basis of 2 outputs that have been integrated.The output current can be set to 3A.Considering its maximum power dissipation, 730mW shows its maximum capacity to transfer and conduct power loss without overheating.If you want a stable supply current, you should keep it at 2.5mA.Mosfet gate drivers produces a voltage of 18V.
TC4423CPA Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TC4423CPA Applications
There are a lot of Microchip Technology TC4423CPA gate drivers applications.
- Uninterruptible Power Supplies (UPS)
- General Purpose 3-Phase Inverter
- 3-Phase Motor Inverter Driver
- DC/DC converters
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Video amplifiers
- High frequency line drivers
- High-speed communications
- Industrial Power Supplies
- Isolated switch mode power supplies (SMPS)
