TC4423VMF713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4423 |
| Pin Count | 8 |
| Max Output Current | 3A |
| Nominal Supply Current | 2.5mA |
| Max Supply Current | 2.5mA |
| Propagation Delay | 75 ns |
| Input Type | Inverting |
| Turn On Delay Time | 75 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 23ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.1 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.1 μs |
| Height Seated (Max) | 0.95mm |
| Length | 6mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4423VMF713 Overview
Its 8-VDFN Exposed Pad package is adopted for higher flexibility.Gate drivers is packaged in the way of Tape & Reel (TR).Configuration is supported by 2 drivers.In the direction of Surface Mount, gate drivers is mounted.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~18V supply voltage.Gate type N-Channel, P-Channel MOSFET has been used in its design.For this device, the temperature range is -40°C~150°C TJ.Input type of Inverting is used.As a result of its configuration, it contains a maximum of 8 terminations.Numerous related parts can be found under its base part number TC4423.The mount method is Surface Mount.There are 8 pins available in the device.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.As a maximum, there is 3A limit to the output current.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.On the board, there are 8 component pins.For higher stability, the supply current should be kept at 2.5mA.
TC4423VMF713 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
TC4423VMF713 Applications
There are a lot of Microchip Technology TC4423VMF713 gate drivers applications.
- General Purpose 3-Phase Inverter
- Isolated Gate Driver Supplies
- Industrial motor drives - compact, standard, premium, servo drives
- Topologies
- Solar power supplies
- 3-Phase Motor Inverter Driver
- Active Clamp Flyback or Forward and Synchronous Rectifier
- A/D drivers
- DC-DC Converters
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
