TC4424AVMF713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4424A |
| Pin Count | 8 |
| Max Output Current | 4.5A |
| Nominal Supply Current | 1mA |
| Max Supply Current | 2mA |
| Propagation Delay | 48 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 48 ns |
| Rise Time | 21ns |
| Fall Time (Typ) | 21 ns |
| Rise / Fall Time (Typ) | 12ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4.5A 4.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height Seated (Max) | 0.95mm |
| Length | 6mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4424AVMF713 Overview
For greater flexibility, the 8-VDFN Exposed Pad package is adopted.There is a package in the form of Tape & Reel (TR).There are 2 drivers installed for this device.Surface Mount is mounted in the way.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~18V supply voltage.Gate type N-Channel, P-Channel MOSFET is designed for it.This device can operate at temperatures up to -40°C~150°C TJ.This program uses the input type of Non-Inverting.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.Mosfet driver contains a variety of related parts under Mosfet drivers base part number TC4424A.Surface Mount is the way it takes to mount the device.A total of 8 pins are available on the device.The device is specifically designed to function with a supply voltage of 5V V.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.An output current as high as 4.5A can be achieved at maximum power.There are several useful electronic components found in its subcategory of MOSFET Drivers.There are 8 component pins on the board.The supply current should be kept at 2mA to ensure higher stability.
TC4424AVMF713 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
TC4424AVMF713 Applications
There are a lot of Microchip Technology TC4424AVMF713 gate drivers applications.
- Head-up and Head mounted displays
- Commercial air-conditioning (CAC)
- General Purpose 3-Phase Inverter
- Solar inverters
- Automotive Applications
- Broadcast equipment
- UPS systems
- High power buffers
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Isolated Supplies for controller area network (CAN),
