TC4424AVOA713
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4424A |
| Pin Count | 8 |
| Max Output Current | 4.5A |
| Nominal Supply Current | 1mA |
| Power Dissipation | 610mW |
| Max Supply Current | 2mA |
| Propagation Delay | 48 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 48 ns |
| Rise Time | 21ns |
| Fall Time (Typ) | 21 ns |
| Rise / Fall Time (Typ) | 12ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4.5A 4.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 610mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
TC4424AVOA713 Overview
The 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.A packaging method of Tape & Reel (TR) is indicated.For its configuration, it incorporates 2 drivers.Gate drivers is mounted in the way of Surface Mount.By using 4.5V~18V supply voltage, it is able to demonstrate its superiority.N-Channel, P-Channel MOSFET is the gate type used for this design.Temperature range -40°C~150°C TJ is allowed for this device.A type of Non-Inverting is used for input in this program.Initially, the configuration is composed of 8 terminations.The base part number TC4424A refers to a number of related parts.Mosfet driver is mounted using the Surface Mount method.Devices have 8 pins available.In order to operate, a voltage of 5V has to be applied.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 4.5A.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.On the board, there are 8 component pins.Based on the maximum power dissipation of 610mW, it is clear that it is capable of transferring and conducting power losses without becoming overheated.To increase stability, keep the supply current at 2mA.
TC4424AVOA713 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 610mW
TC4424AVOA713 Applications
There are a lot of Microchip Technology TC4424AVOA713 gate drivers applications.
- Uninterruptible Power Supplies (UPS)
- UPS systems
- Telecom switch mode power supplies
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Motor Control
- Motor controllers
- Isolated switch mode power supplies (SMPS)
- 3-Phase Motor Inverter Driver
- Industrial motor drives - compact, standard, premium, servo drives
- Portable computers
