TC4424AVOE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.1W |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4424A |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Max Output Current | 4.5A |
| Power Supplies | 4.5/18V |
| Nominal Supply Current | 1mA |
| Power Dissipation | 1.1W |
| Max Supply Current | 2mA |
| Propagation Delay | 48 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 48 ns |
| Rise Time | 21ns |
| Fall Time (Typ) | 21 ns |
| Rise / Fall Time (Typ) | 12ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4.5A 4.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 2.05mm |
| Length | 10.3mm |
| Width | 7.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
TC4424AVOE Overview
The 16-SOIC (0.295, 7.50mm Width) package offers greater flexibility.A packaging method of Tube is used.The configuration is supported by 2 drivers.The device is mounted in the direction of Surface Mount.By using 4.5V~18V supply voltage, it is able to demonstrate its superiority.There is a gate type of N-Channel, P-Channel MOSFET in this design.This device allows temperatures in the range of -40°C~150°C TJ.The input type for this program is Non-Inverting.The configuration is based on 16 terminations.You will find various related parts under the base part number TC4424A.In this case, Surface Mount indicates how the device is to be mounted.The pins are configured with 16 when designing the chip.Mosfet driver is designed specifically to run on 5V volts of power.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.In the maximum case, the output current can be limited to 4.5A.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.A total of 16 pins are available for component connections.Considering its maximum power dissipation, 1.1W shows its maximum capacity to transfer and conduct power loss without overheating.The supply current should be kept at 2mA to ensure higher stability.Due to its 4.5/18V power supply, it can solve power supply problems for an array of diverse applications.
TC4424AVOE Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
16 pins
Maximum power dissipation of 1.1W
TC4424AVOE Applications
There are a lot of Microchip Technology TC4424AVOE gate drivers applications.
- High frequency line drivers
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Commercial and agricultural vehicles (CAV)
- High-speed communications
- Solar power supplies
- Isolated Supplies for controller area network (CAN),
- 3-Phase Motor Inverter Driver
- Isolated Gate Driver Supplies
- Head-up and Head mounted displays
- Industrial Power Supplies
