TC4424AVPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Supplier Device Package | 8-PDIP |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 730mW |
| Voltage - Supply | 4.5V~18V |
| Base Part Number | TC4424A |
| Number of Outputs | 2 |
| Output Voltage | 17.975V |
| Max Output Current | 4.5A |
| Number of Channels | 2 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 250μA |
| Power Dissipation | 1.2W |
| Output Current | 3A |
| Max Supply Current | 2mA |
| Propagation Delay | 48 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 48 ns |
| Rise Time | 21ns |
| Fall Time (Typ) | 21 ns |
| Rise / Fall Time (Typ) | 12ns 12ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Input Bias Current | 10μA |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4.5A 4.5A |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 4.06mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4424AVPA Overview
A higher degree of flexibility is achieved by adopting its 8-DIP (0.300, 7.62mm) package.Tube is the packaging method.This configuration includes 2 drivers.Through Hole is the way in which it is mounted.In the absence of a 4.5V~18V supply voltage, it can demonstrate its superiority.A gate type of N-Channel, P-Channel MOSFET is used in its design.This device can operate at temperatures up to -40°C~150°C TJ.The input type is Non-Inverting.Numerous related parts can be found under its base part number TC4424A.Mounting the device requires Through Hole.As a result, it is configured with 8 pins when it is designed.As a maximum, there is 4.5A limit to the output current.Mosfet driver has been integrated wMosfet driverh a total of 2 outputs for Mosfet drivers basis.The output current supported by the device is 3A.Mosfet gate drivers is permissible to operate at a temperature of 125°C.The allowable minimum value of operating temperature is -40°C.Having the maximum power dissipation of 730mW indicates its maximum capacity to conduct power losses without overheating.To maintain higher stability, the supply current should always be 2mA.The maximum voltage for operation is 18V.Its minimum operating voltage is 4.5V.17.975V is the output voltage.Mosfet gate drivers is configured wMosfet gate driversh 2 channels for operation.
TC4424AVPA Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TC4424AVPA Applications
There are a lot of Microchip Technology TC4424AVPA gate drivers applications.
- Motor Control
- Telecom switch mode power supplies
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Isolated switch mode power supplies (SMPS)
- Line drivers
- White Goods - Air Conditioner, Washing Machine,
- Refrigerator
- Active filtering
- Power factor correction (PFC) circuits
- High frequency line drivers
