TC4424COE713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4424 |
| Pin Count | 16 |
| Max Output Current | 3A |
| Power Supplies | 4.5/18V |
| Nominal Supply Current | 2.5mA |
| Power Dissipation | 470mW |
| Max Supply Current | 2.5mA |
| Propagation Delay | 75 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 75 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 23ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.1 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.1 μs |
| Length | 10.3mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4424COE713 Overview
Its 16-SOIC (0.295, 7.50mm Width) package provides greater flexibility.Gate drivers is packaged in the way of Tape & Reel (TR).Configuration is supported by 2 drivers.In this case, gate drivers is mounted along the way of Surface Mount.In the absence of a 4.5V~18V supply voltage, it can demonstrate its superiority.This device is designed with a N-Channel, P-Channel MOSFET gate type.Mosfet driver is possible to use this device at temperatures as low as 0°C~150°C TJ.The input type is Non-Inverting.Its configuration is based on a total of 16 terminations.Numerous related parts are available for its base part number TC4424.The device is mounted using Surface Mount.The pins are configured with 16 when designing the chip.In this case, BUFFER OR INVERTER BASED MOSFET DRIVER serves as the interface IC.There is an output current limit of 3A for this device.Within this subcategory of MOSFET Drivers, there are several useful electronic components.The component has 16 pins.Using 470mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.In order to ensure greater stability, it is recommended to keep the supply current at 2.5mA.Using its power supply of 4.5/18V, it provides solutions to diverse power supply problems.
TC4424COE713 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
16 pins
Maximum power dissipation of 470mW
TC4424COE713 Applications
There are a lot of Microchip Technology TC4424COE713 gate drivers applications.
- Industrial Motor Inverter - Power Tools, Robotics
- Power factor correction (PFC) circuits
- A/D drivers
- General Purpose 3-Phase Inverter
- Refrigerator
- Telecom switch mode power supplies
- Industrial Power Supplies
- Industrial Modules
- Video amplifiers
- Line drivers
