TC4424EMF
| Parameters | |
|---|---|
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4424 |
| Pin Count | 8 |
| Max Output Current | 3A |
| Nominal Supply Current | 2.5mA |
| Max Supply Current | 2.5mA |
| Propagation Delay | 75 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 75 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 23ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.1 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.1 μs |
| Height Seated (Max) | 0.95mm |
| Length | 6mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
TC4424EMF Overview
There is greater flexibility with the 8-VDFN Exposed Pad package.A packaging method of Tube is indicated.The configuration is supported by 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~18V supply voltage.This device is designed with a N-Channel, P-Channel MOSFET gate type.-40°C~150°C TJ is the allowed temperature range for this device.The input type for this program is Non-Inverting.Its configuration starts with 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number TC4424.Devices are mounted by Surface Mount.A total of 8 pins are available on the device.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 3A.There are several useful electronic components in this subcategory of MOSFET Drivers.8 pins are present on the component.Keeping the supply current at 2.5mA ensures greater stability.
TC4424EMF Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
TC4424EMF Applications
There are a lot of Microchip Technology TC4424EMF gate drivers applications.
- serial peripheral interface (SPI), I2C
- Telecom switch mode power supplies
- Motor Controls
- High-voltage isolated DC-DC converters
- Portable Navigation Devices
- UPS systems
- Motor Drives
- RGB applications
- Digitally controlled power supplies
- Broadcast equipment
