TC4424EPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Base Part Number | TC4424 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 18V |
| Max Output Current | 3A |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 2.5mA |
| Power Dissipation | 730mW |
| Output Current | 3A |
| Max Supply Current | 2.5mA |
| Propagation Delay | 75 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 23 ns |
| Max Output Voltage | 25mV |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Turn-Off Delay Time | 25 ns |
| Rise / Fall Time (Typ) | 23ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Input Bias Current | 10μA |
| Turn On Time | 0.1 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.1 μs |
| Height | 4.06mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4424EPA Overview
In order to increase flexibility, the package 8-DIP (0.300, 7.62mm) is used.Tube represents the packaging method.Through Hole is the way in which it is mounted.By using 4.5V~18V supply voltage, it is able to demonstrate its superiority.Gate type N-Channel, P-Channel MOSFET is designed for it.In this device, temperatures must not exceed -40°C~150°C TJ.Mosfet driver accepts input of type Non-Inverting.Its configuration is based on a total of 8 terminations.There are various parts that can be found under its base part number TC4424.In this case, Through Hole indicates how the device is to be mounted.During design, it is configured with 8 pins.The interface IC of the device is BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be limited to 3A.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The board contains 8 pins for component connections.Mosfet driver has been integrated wMosfet driverh a total of 2 outputs for Mosfet drivers basis.This device is capable of delivering 3A current.This device has a maximum power dissipation of 730mW, indicating that it is capable of reducing power loss without overheating.For higher stability, the supply current should be kept at 2.5mA.The voltage it outputs is 18V.During the operation of the system, the voltage of the operating supply should be set to 15V.A maximum output voltage of 25mV should be maintained.
TC4424EPA Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TC4424EPA Applications
There are a lot of Microchip Technology TC4424EPA gate drivers applications.
- Broadcast equipment
- Motor Controls
- Head-up and Head mounted displays
- Uninterruptible Power Supplies (UPS)
- Solar power supplies
- Commercial and agricultural vehicles (CAV)
- AC-DC Inverters
- Industrial motor drives - compact, standard, premium, servo drives
- Isolated Supplies for controller area network (CAN),
- Portable Navigation Devices
