TC4424VMF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4424 |
| Pin Count | 8 |
| Max Output Current | 3A |
| Nominal Supply Current | 2.5mA |
| Max Supply Current | 2.5mA |
| Propagation Delay | 75 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 75 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 23ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.1 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.1 μs |
| Height Seated (Max) | 0.95mm |
| Length | 6mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4424VMF Overview
Gate drivers provides greater flexibilGate driversy to use the 8-VDFN Exposed Pad package.A packaging method of Tube is used.Configuration is based on 2 drivers.In this case, gate drivers is mounted along the way of Surface Mount.When the supply voltage is set to 4.5V~18V, it can demonstrate its superiority.A gate type of N-Channel, P-Channel MOSFET is used in its design.In this device, temperatures must not exceed -40°C~150°C TJ.Non-Inverting is used as its input type.8 terminations constitute its foundation.You will find various related parts under the base part number TC4424.Surface Mount is the way it takes to mount the device.There are 8 pins available in the device.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.3A is the maximum output current.Within this subcategory of MOSFET Drivers, there are several useful electronic components.A board with 8 component pins is available.As a precaution, make sure the supply current is kept at 2.5mA.
TC4424VMF Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
TC4424VMF Applications
There are a lot of Microchip Technology TC4424VMF gate drivers applications.
- Pulse transformer drivers
- High-speed communications
- Isolated Supplies for Motor Control
- Smart Phones
- Industrial Power Supplies
- Industrial motor drives - compact, standard, premium, servo drives
- Refrigerator
- Active filtering
- High current laser/LED systems
- Telecom switch mode power supplies
