TC4425AVOA713
| Parameters | |
|---|---|
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 610mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4425A |
| Pin Count | 8 |
| Max Output Current | 4.5A |
| Nominal Supply Current | 1mA |
| Power Dissipation | 610mW |
| Max Supply Current | 2mA |
| Propagation Delay | 48 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 48 ns |
| Rise Time | 21ns |
| Fall Time (Typ) | 21 ns |
| Rise / Fall Time (Typ) | 12ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4.5A 4.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
TC4425AVOA713 Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.Tape & Reel (TR) is the form of the package.For its configuration, it incorporates 2 drivers.Its recommended mounting way is Surface Mount.In the absence of a 4.5V~18V supply voltage, it can demonstrate its superiority.Gate type N-Channel, P-Channel MOSFET has been used in its design.There is a temperature range for this device of -40°C~150°C TJ.Inverting, Non-Inverting is used as its input type.Initially, the configuration is composed of 8 terminations.Numerous related parts are available for its base part number TC4425A.You mount it with Surface Mount.At the time of design, it is configured with 8 pins.Specification is for 5V supply voltage operation.Mosfet driver utilizes the interface IC BUFFER OR INVERTER BASED MOSFET DRIVER.The maximum output current can amount to 4.5A.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.The board contains 8 pins for component connections.Its maximum power dissipation of 610mW shows its power loss capacity without overheating.Mosfet gate drivers is recommended to keep the supply current at 2mA to ensure greater stabilMosfet gate driversy.
TC4425AVOA713 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 610mW
TC4425AVOA713 Applications
There are a lot of Microchip Technology TC4425AVOA713 gate drivers applications.
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Smart Phones
- AC-DC Inverters
- 3-Phase Motor Inverter Driver
- High-voltage isolated DC-DC converters
- Isolated Supplies for Motor Control
- Active filtering
- Solar inverters
- Industrial Motor Inverter - Power Tools, Robotics
- Digitally controlled power supplies
