TC4425AVOE713
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.1W |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4425A |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Max Output Current | 4.5A |
| Power Supplies | 4.5/18V |
| Nominal Supply Current | 2mA |
| Input Type | Inverting, Non-Inverting |
| Rise Time | 21ns |
| Fall Time (Typ) | 21 ns |
| Rise / Fall Time (Typ) | 12ns 12ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4.5A 4.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
TC4425AVOE713 Overview
A higher degree of flexibility is achieved by adopting its 16-SOIC (0.295, 7.50mm Width) package.Tape & Reel (TR) represents the package.Configuration is supported by 2 drivers.Surface Mount is the way in which it is mounted.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~18V supply voltage.This gate type has a N-Channel, P-Channel MOSFET design.Temperature range -40°C~150°C TJ is allowed for this device.The input type for this program is Inverting, Non-Inverting.Its configuration is based on a total of 16 terminations.The base part number TC4425A refers to a number of related parts.Mounting the device requires Surface Mount.In order to operate, a voltage of 5V has to be applied.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 4.5A.Its subcategory of MOSFET Drivers contains various useful electronic components.The board has a total of 16 component pins.Considering its maximum power dissipation, 1.1W shows its maximum capacity to transfer and conduct power loss without overheating.Using its power supply of 4.5/18V, it provides solutions to diverse power supply problems.
TC4425AVOE713 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
Maximum power dissipation of 1.1W
TC4425AVOE713 Applications
There are a lot of Microchip Technology TC4425AVOE713 gate drivers applications.
- Isolated Supplies for controller area network (CAN),
- Topologies
- Dual-Battery Systems
- High-speed communications
- Industrial Motor Inverter - Power Tools, Robotics
- Motor Drives
- Commercial air-conditioning (CAC)
- Solar inverters
- Industrial Modules
- Automotive Applications
