TC4425VMF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 40 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4425 |
| Pin Count | 8 |
| JESD-30 Code | R-PQCC-N8 |
| Max Output Current | 3A |
| Power Supplies | 4.5/18V |
| Interface | I2C, SPI, USART |
| Memory Size | 3.5kB |
| Nominal Supply Current | 2.5mA |
| RAM Size | 128B |
| Memory Type | EPROM |
| Max Supply Current | 2.5mA |
| Propagation Delay | 75 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 75 ns |
| Watchdog Timer | Yes |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Core Architecture | PIC |
| Rise / Fall Time (Typ) | 23ns 25ns |
| Max Frequency | 4MHz |
| Channel Type | Independent |
| Number of Programmable I/O | 33 |
| Number of Drivers | 2 |
| Turn On Time | 0.1 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.1 μs |
| Height Seated (Max) | 0.95mm |
| Length | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4425VMF Overview
The 8-VDFN Exposed Pad package provides greater flexibility.Tube represents the package.The configuration is supported by 2 drivers.The device is mounted in the direction of Surface Mount.When the supply voltage is set to 4.5V~18V, it can demonstrate its superiority.There is a gate type of N-Channel, P-Channel MOSFET in this design.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Mosfet driver uses Inverting, Non-Inverting as Mosfet drivers input type.As a result of its configuration, it contains a maximum of 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number TC4425.The mount method is Surface Mount.As a result, it is configured with 40 pins when it is designed.Mosfet driver is possible to achieve a maximum output current of 3A.This subcategory of MOSFET Drivers has a number of useful electronic components.The component has 8 pins.Using 1W as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.To maintain higher stability, the supply current should always be 2.5mA.Due to its 4.5/18V power supply, it can solve power supply problems for an array of diverse applications.
TC4425VMF Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
40 pins
Maximum power dissipation of 1W
TC4425VMF Applications
There are a lot of Microchip Technology TC4425VMF gate drivers applications.
- White Goods - Air Conditioner, Washing Machine,
- Isolated switch mode power supplies (SMPS)
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- serial peripheral interface (SPI), I2C
- Welding
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Pulse transformer drivers
- Broadcast equipment
- Active filtering
- Head-up and Head mounted displays
