TC4425VOE713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4425 |
| Pin Count | 16 |
| Max Output Current | 3A |
| Power Supplies | 4.5/18V |
| Nominal Supply Current | 2.5mA |
| Power Dissipation | 470mW |
| Max Supply Current | 2.5mA |
| Propagation Delay | 75 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 75 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 23ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.1 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.1 μs |
| Length | 10.3mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4425VOE713 Overview
Its 16-SOIC (0.295, 7.50mm Width) package is adopted for higher flexibility.Tape & Reel (TR) is the packaging method.Configuration is based on 2 drivers.In this case, gate drivers is mounted along the way of Surface Mount.When the supply voltage is set to 4.5V~18V, it can demonstrate its superiority.Gate type N-Channel, P-Channel MOSFET is designed for it.This device allows temperatures in the range of -40°C~150°C TJ.The input type for this program is Inverting, Non-Inverting.Its configuration is based on a total of 16 terminations.Numerous related parts are available for its base part number TC4425.Mounting the device requires Surface Mount.A total of 16 pins are available on the device.Mosfet driver utilizes the interface IC BUFFER OR INVERTER BASED MOSFET DRIVER.There is an output current limit of 3A for this device.This subcategory of MOSFET Drivers has a number of useful electronic components.On the board, there are 16 component pins.Considering its maximum power dissipation, 470mW shows its maximum capacity to transfer and conduct power loss without overheating.Mosfet gate drivers is recommended to keep the supply current at 2.5mA to ensure greater stabilMosfet gate driversy.Due to its power supply of 4.5/18V, it provides an effective solution to power supply problems for a wide range of applications.
TC4425VOE713 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
16 pins
Maximum power dissipation of 470mW
TC4425VOE713 Applications
There are a lot of Microchip Technology TC4425VOE713 gate drivers applications.
- Broadcast equipment
- Line drivers
- High-voltage isolated DC-DC converters
- Multicolor LED/laser displays
- Industrial Motor Inverter - Power Tools, Robotics
- Solar power supplies
- High current laser/LED systems
- Commercial and agricultural vehicles (CAV)
- serial peripheral interface (SPI), I2C
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
