TC4426ACOA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 12Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4426A |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 17.975V |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 4.5mA |
| Power Dissipation | 470mW |
| Output Current | 1.5A |
| Max Supply Current | 2mA |
| Propagation Delay | 35 ns |
| Input Type | Inverting |
| Turn On Delay Time | 35 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Input Bias Current | 10μA |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height | 1.4986mm |
| Length | 4.8768mm |
| Width | 3.9116mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4426ACOA Overview
In order to increase flexibility, the package 8-SOIC (0.154, 3.90mm Width) is used.There is a package in the form of Tube.In this case, gate drivers is mounted along the way of Surface Mount.In the absence of a power supply voltage of 4.5V~18V V, it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a gate type of N-Channel, P-Channel MOSFET.Mosfet driver is possible to use this device at temperatures as low as 0°C~150°C TJ.Inverting is used as its input type.It's configured with 8 terminations.Under its base part number TC4426A, various related parts can be found.You mount it with Surface Mount.Devices have 8 pins available.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.There is an output current limit of 1.5A for this device.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.8 pins are present on the component.Mosfet driver has been integrated wMosfet driverh a total of 2 outputs for Mosfet drivers basis.This device is capable of delivering 1.5A current.According to its maximum power dissipation, 470mW is capable of conducting and transferring a large amount of power without overheating.As a precaution, make sure the supply current is kept at 2mA.17.975V is the output voltage.Mosfet gate drivers is recommended that you set the operating supply voltage to 15V.Mosfet gate drivers operates wMosfet gate driversh a resistance of 12Ohm.
TC4426ACOA Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
Resistance of 12Ohm
TC4426ACOA Applications
There are a lot of Microchip Technology TC4426ACOA gate drivers applications.
- Motor Control
- Isolated Supplies for Motor Control
- Refrigerator
- Isolated switch mode power supplies (SMPS)
- DC-DC Converters
- Dual-Battery Systems
- Motor Controls
- Uninterruptible Power Supplies (UPS)
- UPS systems
- Topologies
