TC4426ACPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 12Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Base Part Number | TC4426A |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 17.975V |
| Max Output Current | 1.5A |
| Nominal Supply Current | 4.5mA |
| Power Dissipation | 730mW |
| Output Current | 1.5A |
| Max Supply Current | 2mA |
| Propagation Delay | 35 ns |
| Input Type | Inverting |
| Turn On Delay Time | 35 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Input Bias Current | 10μA |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height | 4.06mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4426ACPA Overview
The 8-DIP (0.300, 7.62mm) package offers greater flexibility.A packaging method of Tube is used.In the direction of Through Hole, gate drivers is mounted.In the absence of a 4.5V~18V supply voltage, its superiority can be demonstrated.N-Channel, P-Channel MOSFET is the gate type used for this design.Temperature range 0°C~150°C TJ is allowed for this device.The input type is Inverting.Initially, the configuration is composed of 8 terminations.Numerous related parts are available for its base part number TC4426A.The mount method is Through Hole.During design, it is configured with 8 pins.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.There is a maximum output current of 1.5A that can be achieved.Its subcategory of MOSFET Drivers contains various useful electronic components.The number of component pins is 8.Mosfet driver is based on a basis of 2 outputs that have been integrated.The device is capable of delivering a current of 1.5A.Using 730mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.The supply current should be kept at 2mA to ensure higher stability.As a result, a voltage of 17.975V is produced.For this device to function, a resistance value of 12Ohm is required.
TC4426ACPA Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
Resistance of 12Ohm
TC4426ACPA Applications
There are a lot of Microchip Technology TC4426ACPA gate drivers applications.
- Portable Media Players
- Isolated Supplies for Motor Control
- Head-up and Head mounted displays
- Motor Control
- Portable computers
- Commercial and agricultural vehicles (CAV)
- DC/DC converters
- Active filtering
- DC-DC Converters
- Telecom switch mode power supplies
