TC4426AEOA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 12Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4426A |
| Pin Count | 8 |
| Output Voltage | 18V |
| Max Output Current | 1.5A |
| Nominal Supply Current | 4.5mA |
| Power Dissipation | 470mW |
| Output Current | 1.5A |
| Max Supply Current | 2mA |
| Propagation Delay | 35 ns |
| Input Type | Inverting |
| Turn On Delay Time | 35 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Input Bias Current | 10μA |
| Turn On Time | 0.045 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.045 μs |
| Height | 1.4986mm |
| Length | 4.8768mm |
| Width | 3.9116mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4426AEOA Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.The packaging method is indicated by Tube.Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.There is a mounting bracket in the way of Surface Mount.By using 4.5V~18V supply voltage, it is able to demonstrate its superiority.The gate type on this device is N-Channel, P-Channel MOSFET.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Input type of Inverting is used.Initially, the configuration is composed of 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number TC4426A.In this case, Surface Mount indicates how the device is mounted.There are 8 pins available in the device.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.The maximum output current can amount to 1.5A.Within this subcategory of MOSFET Drivers, there are several useful electronic components.The board has a total of 8 component pins.An output current of 1.5A is supported.Based on its maximum power dissipation of 470mW, it is clear that it is capable of transferring and conducting power loss without overheating.To ensure high stability, the supply current should be kept at 2mA.Mosfet gate drivers outputs 18V as voltage.The resistance of the device is 12Ohm.
TC4426AEOA Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
Resistance of 12Ohm
TC4426AEOA Applications
There are a lot of Microchip Technology TC4426AEOA gate drivers applications.
- Portable Navigation Devices
- Smart Phones
- DC-DC Converters
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Isolated Gate Driver Supplies
- RGB applications
- Isolated switch mode power supplies (SMPS)
- A/D drivers
- Automotive Applications
- Head-up and Head mounted displays
