TC4426CPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 12Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Base Part Number | TC4426 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 18V |
| Max Output Current | 1.5A |
| Nominal Supply Current | 4.5mA |
| Power Dissipation | 730mW |
| Output Current | 1.5A |
| Max Supply Current | 4.5mA |
| Propagation Delay | 50 ns |
| Input Type | Inverting |
| Turn On Delay Time | 50 ns |
| Max Output Voltage | 17.975V |
| Rise Time | 20ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 19ns 19ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Input Bias Current | 10μA |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.06 μs |
| Height | 4.06mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4426CPA Overview
The 8-DIP (0.300, 7.62mm) package provides greater flexibility.Gate drivers is packaged in the way of Tube.It's mounted on the way to Through Hole.In the absence of a 4.5V~18V supply voltage, its superiority can be demonstrated.N-Channel, P-Channel MOSFET is the gate type used for this design.Temperature range 0°C~150°C TJ is allowed for this device.Inverting is used as the input type.Its configuration is based on a total of 8 terminations.Numerous related parts can be found under its base part number TC4426.The device is mounted with Through Hole.Mosfet driver is configured wMosfet driverh 8 pins when designing.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.In the maximum case, the output current can be 1.5A volts.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The board has 8 component pins.In terms of its basis, there are 2 outputs integrated.The output current of this device can be set to 1.5A.Based on the maximum power dissipation of 730mW, it is clear that it is capable of transferring and conducting power losses without becoming overheated.Keeping the supply current at 4.5mA ensures greater stability.The voltage it outputs is 18V.Device operation requires a resistance of 12Ohm.The maximum output voltage should be kept at 17.975V.
TC4426CPA Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
Resistance of 12Ohm
TC4426CPA Applications
There are a lot of Microchip Technology TC4426CPA gate drivers applications.
- High current laser/LED systems
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Motor Controls
- Pulse transformer drivers
- Refrigerator
- LCD/LCoS/DLP portable and embedded pico projectors
- UPS systems
- Portable Media Players
- Telecom switch mode power supplies
- Motor controllers
