TC4426EMF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4426 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Interface | Serial |
| Nominal Supply Current | 4.5mA |
| Max Supply Current | 4.5mA |
| Propagation Delay | 50 ns |
| Input Type | Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Density | 2 kb |
| Rise / Fall Time (Typ) | 19ns 19ns |
| Max Frequency | 2MHz |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.06 μs |
| Height Seated (Max) | 0.95mm |
| Length | 6mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4426EMF Overview
The 8-VDFN Exposed Pad package offers greater flexibility.A packaging method of Tube is indicated.This device is equipped with 2 drivers for its configuration.The device is mounted in the direction of Surface Mount.In the absence of a 4.5V~18V supply voltage, its superiority can be demonstrated.A gate type of N-Channel, P-Channel MOSFET is used in its design.The allowable temperature range that this device can be operated in is -40°C~150°C TJ.Inverting is used as the input type.The configuration starts with 8 terminations.There are various related parts under its base part number TC4426.The mount method is Surface Mount.The pins are configured with 8 when designing the chip.1.5A is the maximum output current.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.The number of component pins is 8.Mosfet gate drivers is recommended to keep the supply current at 4.5mA to ensure greater stabilMosfet gate driversy.
TC4426EMF Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
TC4426EMF Applications
There are a lot of Microchip Technology TC4426EMF gate drivers applications.
- High power buffers
- High-speed communications
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- serial peripheral interface (SPI), I2C
- A/D drivers
- Digitally controlled power supplies
- Portable computers
- Multicolor LED/laser displays
- Isolated switch mode power supplies (SMPS)
- Smart Phones
