TC4426EMF713
| Parameters | |
|---|---|
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4426 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Nominal Supply Current | 4.5mA |
| Max Supply Current | 4.5mA |
| Propagation Delay | 50 ns |
| Input Type | Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 19ns 19ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.06 μs |
| Height Seated (Max) | 0.95mm |
| Length | 6mm |
| Width | 5mm |
TC4426EMF713 Overview
In order to increase flexibility, the package 8-VDFN Exposed Pad is used.A packaging method of Tape & Reel (TR) is used.2 drivers are incorporated for its configuration.Ideally, it should be mounted in the direction of Surface Mount.When the supply voltage is 4.5V~18V it is able to demonstrate its superiority.Gate type N-Channel, P-Channel MOSFET is designed for it.In this device, temperatures must not exceed -40°C~150°C TJ.Mosfet driver accepts input of type Inverting.The configuration starts with 8 terminations.Numerous related parts can be found under its base part number TC4426.In this case, Surface Mount indicates how the device is to be mounted.During design, it is configured with 8 pins.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.Mosfet driver is possible for the output current to be as low as 1.5A.Several electronic components are included in its subcategory of MOSFET Drivers.There are 8 component pins on the board.Keeping the supply current at 4.5mA ensures greater stability.
TC4426EMF713 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
TC4426EMF713 Applications
There are a lot of Microchip Technology TC4426EMF713 gate drivers applications.
- Broadcast equipment
- Dual-Battery Systems
- Commercial and agricultural vehicles (CAV)
- High current laser/LED systems
- serial peripheral interface (SPI), I2C
- Digitally controlled power supplies
- Portable Navigation Devices
- Isolated Supplies for Motor Control
- General Purpose 3-Phase Inverter
- DC-DC Converters
