TC4426EOA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount, Through Hole |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 12Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4426 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 25mV |
| Max Output Current | 1.5A |
| Nominal Supply Current | 4.5mA |
| Power Dissipation | 470mW |
| Output Current | 1.5A |
| Max Supply Current | 4.5mA |
| Propagation Delay | 50 ns |
| Input Type | Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 19ns 19ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Input Bias Current | 10μA |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.06 μs |
| Height | 1.42mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4426EOA Overview
For greater flexibility, the 8-SOIC (0.154, 3.90mm Width) package is adopted.There is a package in the form of Tube.Surface Mount is the way in which it is mounted.When the supply voltage is 4.5V~18V it is able to demonstrate its superiority.There is a gate type of N-Channel, P-Channel MOSFET in this design.In this device, temperatures must not exceed -40°C~150°C TJ.Inverting is used as its input type.Mosfet driver is based on 8 terminations.Numerous related parts can be found under its base part number TC4426.Mounting the device requires Surface Mount, Through Hole.During design, it is configured with 8 pins.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be limited to 1.5A.There are several useful electronic components in this subcategory of MOSFET Drivers.Components with 8 pins are available.The basis of this system consists of 2 outputs.An output current of 1.5A is supported.470mW dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.For higher stability, the supply current should be kept at 4.5mA.25mV is the output voltage.The resistance of the device is 12Ohm.
TC4426EOA Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
Resistance of 12Ohm
TC4426EOA Applications
There are a lot of Microchip Technology TC4426EOA gate drivers applications.
- Dual-Battery Systems
- Solar power supplies
- High frequency line drivers
- Pulse transformer drivers
- 3-Phase Motor Inverter Driver
- Uninterruptible Power Supplies (UPS)
- Industrial motor drives - compact, standard, premium, servo drives
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Welding
- Commercial air-conditioning (CAC)
