TC4426EPA
| Parameters | |
|---|---|
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 19ns 19ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Input Bias Current | 10μA |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.06 μs |
| Height | 4.06mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 12Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Base Part Number | TC4426 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 18V |
| Max Output Current | 1.5A |
| Nominal Supply Current | 4.5mA |
| Power Dissipation | 730mW |
| Output Current | 1.5A |
| Max Supply Current | 4.5mA |
| Propagation Delay | 50 ns |
| Input Type | Inverting |
| Turn On Delay Time | 50 ns |
TC4426EPA Overview
In order to increase flexibility, the package 8-DIP (0.300, 7.62mm) is used.A package of Tube has been used.Ideally, it should be mounted in the direction of Through Hole.In the absence of a 4.5V~18V supply voltage, it can demonstrate its superiority.Gate type N-Channel, P-Channel MOSFET has been used in its design.For this device, the temperature range is -40°C~150°C TJ.Inverting is the input type used in this program.The configuration is based on 8 terminations.Many related parts can be found under its base part number TC4426.The device is mounted using Through Hole.When the device is designed, it has 8 pins.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED MOSFET DRIVER as Mosfet drivers interface chip.There is a maximum output current of 1.5A.There are several useful electronic components found in its subcategory of MOSFET Drivers.8 pins are present on the component.Mosfet driver has been integrated wMosfet driverh a total of 2 outputs for Mosfet drivers basis.Mosfet gate drivers can deliver a current of 1.5A.This device has a maximum power dissipation of 730mW, indicating that it is capable of reducing power loss without overheating.Mosfet gate drivers is recommended that you keep the supply current at 4.5mA in order to achieve greater stabilMosfet gate driversy.In this case, the voltage output is 18V.For this device to function, a resistance value of 12Ohm is required.
TC4426EPA Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
Resistance of 12Ohm
TC4426EPA Applications
There are a lot of Microchip Technology TC4426EPA gate drivers applications.
- Commercial air-conditioning (CAC)
- Power factor correction (PFC) circuits
- Industrial Motor Inverter - Power Tools, Robotics
- DC-DC Converters
- LCD/LCoS/DLP portable and embedded pico projectors
- PCMCIA applications
- High current laser/LED systems
- Dual-Battery Systems
- Solar inverters
- Industrial Power Supplies
