TC4426EUA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 340mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4426 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Interface | CAN, I2C, SPI, USART |
| Memory Size | 16kB |
| Nominal Supply Current | 4.5mA |
| RAM Size | 768B |
| Memory Type | FLASH |
| Power Dissipation | 340mW |
| Max Supply Current | 4.5mA |
| Propagation Delay | 50 ns |
| Input Type | Inverting |
| Turn On Delay Time | 50 ns |
| Watchdog Timer | Yes |
| Data Bus Width | 8b |
| Number of Timers/Counters | 4 |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Core Architecture | PIC |
| Rise / Fall Time (Typ) | 19ns 19ns |
| Max Frequency | 40MHz |
| Channel Type | Independent |
| Number of Programmable I/O | 33 |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.06 μs |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4426EUA Overview
A higher level of flexibility is provided by its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.A package of Tube has been used.This device is equipped with 2 drivers for its configuration.The device is mounted in the direction of Surface Mount.When the supply voltage is set to 4.5V~18V, it can demonstrate its superiority.Gate type N-Channel, P-Channel MOSFET has been used in its design.-40°C~150°C TJ is the allowed temperature range for this device.Inverting is used as the input type in this program.There are 8 terminations to form the base of its configuration.Many related parts can be found under its base part number TC4426.You mount it with Surface Mount.In the device, there are 8 pins.There is a maximum output current of 1.5A.Within this subcategory of MOSFET Drivers, there are several useful electronic components.On the board, there are 8 component pins.Its maximum power dissipation of 340mW also demonstrates its maximum ability to transfer power without overheating.Mosfet gate drivers is recommended to keep the supply current at 4.5mA to ensure greater stabilMosfet gate driversy.
TC4426EUA Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 340mW
TC4426EUA Applications
There are a lot of Microchip Technology TC4426EUA gate drivers applications.
- Telecom switch mode power supplies
- A/D drivers
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Topologies
- Dual-Battery Systems
- General Purpose 3-Phase Inverter
- Head-up and Head mounted displays
- Motor controllers
- White Goods - Air Conditioner, Washing Machine,
- UPS systems
