TC4426EUA713
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4426 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Nominal Supply Current | 4.5mA |
| Power Dissipation | 340mW |
| Max Supply Current | 4.5mA |
| Propagation Delay | 50 ns |
| Input Type | Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 19ns 19ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.06 μs |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 340mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
TC4426EUA713 Overview
The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package provides greater flexibility.Tape & Reel (TR) is the packaging method.This configuration includes 2 drivers.There is a mounting bracket in the way of Surface Mount.A supply voltage of 4.5V~18V demonstrates its superiority.Gate drivers is designed wGate driversh a gate type of N-Channel, P-Channel MOSFET.For this device, the temperature range is -40°C~150°C TJ.Mosfet driver accepts input of type Inverting.Its configuration starts with 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number TC4426.The device is mounted using Surface Mount.At the time of design, it is configured with 8 pins.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED MOSFET DRIVER as Mosfet drivers interface chip.There is an output current limit of 1.5A for this device.There are several useful electronic components found in its subcategory of MOSFET Drivers.A board with 8 component pins is available.Its maximum power dissipation of 340mW also demonstrates its maximum ability to transfer power without overheating.Mosfet gate drivers is recommended that you keep the supply current at 4.5mA in order to achieve greater stabilMosfet gate driversy.
TC4426EUA713 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 340mW
TC4426EUA713 Applications
There are a lot of Microchip Technology TC4426EUA713 gate drivers applications.
- Active filtering
- Isolated Supplies for Motor Control
- Industrial Modules
- Automotive Applications
- PCMCIA applications
- General Purpose 3-Phase Inverter
- Video amplifiers
- Motor controllers
- Isolated Supplies for controller area network (CAN),
- DC-DC Converters
