TC4426VPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Base Part Number | TC4426 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Nominal Supply Current | 4.5mA |
| Power Dissipation | 730mW |
| Max Supply Current | 4.5mA |
| Propagation Delay | 50 ns |
| Input Type | Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 19ns 19ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.06 μs |
| Length | 9.46mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4426VPA Overview
The 8-DIP (0.300, 7.62mm) package provides greater flexibility.Gate drivers is package in Tube case.The configuration is supported by 2 drivers.In this case, gate drivers is mounted along the way of Through Hole.When the supply voltage is set to 4.5V~18V, it can demonstrate its superiority.The gate type on this device is N-Channel, P-Channel MOSFET.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.Inverting is used as the input type.8 terminations constitute its foundation.Mosfet driver is possible to find various related parts under Mosfet drivers base part number TC4426.Through Hole is the way it takes to mount the device.Devices have 8 pins available.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be 1.5A volts.Several electronic components are included in its subcategory of MOSFET Drivers.The number of component pins is 8.According to its maximum power dissipation, 730mW is capable of conducting and transferring a large amount of power without overheating.To maintain higher stability, the supply current should always be 4.5mA.
TC4426VPA Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TC4426VPA Applications
There are a lot of Microchip Technology TC4426VPA gate drivers applications.
- Broadcast equipment
- Automotive Applications
- RGB applications
- LCD/LCoS/DLP portable and embedded pico projectors
- Commercial and agricultural vehicles (CAV)
- General Purpose 3-Phase Inverter
- serial peripheral interface (SPI), I2C
- Power factor correction (PFC) circuits
- Multicolor LED/laser displays
- AC-DC Inverters
