TC4427ACOA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 12Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4427A |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 18V |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 4.5mA |
| Power Dissipation | 470mW |
| Output Current | 1.5A |
| Max Supply Current | 2mA |
| Propagation Delay | 35 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 35 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Input Bias Current | 10μA |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height | 1.42mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4427ACOA Overview
The 8-SOIC (0.154, 3.90mm Width) package offers greater flexibility.A packaging method of Tube is used.It's mounted on the way to Surface Mount.By using 4.5V~18V supply voltage, it is able to demonstrate its superiority.This device is designed with a N-Channel, P-Channel MOSFET gate type.This device allows temperatures in the range of 0°C~150°C TJ.Non-Inverting is the input type used in this program.The configuration is based on 8 terminations.There are various parts that can be found under its base part number TC4427A.Surface Mount is the way it takes to mount the device.During design, it is configured with 8 pins.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be 1.5A volts.Within this subcategory of MOSFET Drivers, there are several useful electronic components.A board with 8 component pins is available.The basis of this model has 2 outputs integrated.The output current can be set to 1.5A.470mW dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.The supply current should be kept at 2mA to ensure higher stability.In this case, the voltage output is 18V.In order to operate properly, the operating supply voltage should be set to 15V.The device operates with a resistance of 12Ohm.
TC4427ACOA Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
Resistance of 12Ohm
TC4427ACOA Applications
There are a lot of Microchip Technology TC4427ACOA gate drivers applications.
- Multicolor LED/laser displays
- Industrial Modules
- High-speed communications
- LCD/LCoS/DLP portable and embedded pico projectors
- Industrial motor drives - compact, standard, premium, servo drives
- Broadcast equipment
- Power factor correction (PFC) circuits
- Pulse transformer drivers
- High frequency line drivers
- Industrial Power Supplies
