TC4427ACPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 12Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Base Part Number | TC4427A |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Nominal Supply Current | 4.5mA |
| Power Dissipation | 730mW |
| Max Supply Current | 2mA |
| Propagation Delay | 35 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 35 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Input Bias Current | 10μA |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.04 μs |
| Height | 4.06mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4427ACPA Overview
For greater flexibility, its 8-DIP (0.300, 7.62mm) package is used.A packaging method of Tube is used.There are 2 drivers installed for this device.In the direction of Through Hole, gate drivers is mounted.In the absence of a 4.5V~18V supply voltage, its superiority can be demonstrated.A gate type of N-Channel, P-Channel MOSFET has been used in its design.The allowable temperature range that this device can be operated in is 0°C~150°C TJ.Non-Inverting is the input type used in this program.Initially, the configuration is composed of 8 terminations.Under its base part number TC4427A, various related parts can be found.The mount method is Through Hole.When the device is designed, it has 8 pins.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.There is a maximum output current of 1.5A that can be achieved.Several electronic components are included in its subcategory of MOSFET Drivers.On the board, there are 8 component pins.Based on its maximum power dissipation of 730mW, it is clear that it is capable of transferring and conducting power loss without overheating.To increase stability, keep the supply current at 2mA.Resistance 12Ohm is used for operation.
TC4427ACPA Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
Resistance of 12Ohm
TC4427ACPA Applications
There are a lot of Microchip Technology TC4427ACPA gate drivers applications.
- Dual-Battery Systems
- A/D drivers
- Welding
- Industrial Power Supplies
- Industrial motor drives - compact, standard, premium, servo drives
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Telecom switch mode power supplies
- General Purpose 3-Phase Inverter
- Isolated switch mode power supplies (SMPS)
- Video amplifiers
