TC4427AEOA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 12Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4427A |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 18V |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 4.5mA |
| Power Dissipation | 470mW |
| Output Current | 1.5A |
| Max Supply Current | 2mA |
| Propagation Delay | 35 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 35 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Input Bias Current | 10μA |
| Turn On Time | 0.045 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.045 μs |
| Height | 1.42mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4427AEOA Overview
In order to increase flexibility, the package 8-SOIC (0.154, 3.90mm Width) is used.A packaging method of Tube is indicated.In the direction of Surface Mount, gate drivers is mounted.When the supply voltage is set to 4.5V~18V, it can demonstrate its superiority.There is a gate type of N-Channel, P-Channel MOSFET in this design.Temperature range -40°C~150°C TJ is allowed for this device.Non-Inverting is used as the input type.The configuration is based on 8 terminations.Under its base part number TC4427A, various related parts can be found.The mount method is Surface Mount.The pins are configured with 8 when designing the chip.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.1.5A is the maximum output current.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of MOSFET Drivers.The component has 8 pins.For its basis, there are 2 outputs integrated.This device supports a current output of 1.5A at the output.Based on its maximum power dissipation of 470mW, it is clear that it is capable of transferring and conducting power loss without overheating.Mosfet gate drivers is recommended that you keep the supply current at 2mA in order to achieve greater stabilMosfet gate driversy.In this case, the voltage is 18V.Mosfet gate drivers is recommended that the operating voltage of the supply be set at 15V.Mosfet gate drivers operates wMosfet gate driversh a resistance of 12Ohm.
TC4427AEOA Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
Resistance of 12Ohm
TC4427AEOA Applications
There are a lot of Microchip Technology TC4427AEOA gate drivers applications.
- Commercial air-conditioning (CAC)
- PCMCIA applications
- High-speed communications
- Uninterruptible Power Supplies (UPS)
- Isolated Gate Driver Supplies
- Portable Media Players
- 3-Phase Motor Inverter Driver
- Multicolor LED/laser displays
- A/D drivers
- UPS systems
