TC4427AEOA713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4427A |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Nominal Supply Current | 1mA |
| Power Dissipation | 470mW |
| Output Current | 1.5A |
| Max Supply Current | 2mA |
| Propagation Delay | 35 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 35 ns |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.045 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.045 μs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4427AEOA713 Overview
A higher level of flexibility is provided by its 8-SOIC (0.154, 3.90mm Width) package.The packaging method is indicated by Tape & Reel (TR).Configuration is based on 2 drivers.Surface Mount is mounted in the way of the device.A supply voltage of 4.5V~18V demonstrates its superiority.Gate drivers is designed wGate driversh a gate type of N-Channel, P-Channel MOSFET.There is a temperature range for this device of -40°C~150°C TJ.Non-Inverting is used as its input type.Initially, the configuration is composed of 8 terminations.Numerous related parts can be found under its base part number TC4427A.The mount method is Surface Mount.A total of 8 pins are available on the device.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED MOSFET DRIVER as Mosfet drivers interface chip.As a maximum, there is 1.5A limit to the output current.There are several useful electronic components within its subcategory MOSFET Drivers.The component has 8 pins.An output current of 1.5A is supported.Its maximum power dissipation of 470mW also demonstrates its maximum ability to transfer power without overheating.Mosfet gate drivers is recommended that you keep the supply current at 2mA in order to achieve greater stabilMosfet gate driversy.
TC4427AEOA713 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC4427AEOA713 Applications
There are a lot of Microchip Technology TC4427AEOA713 gate drivers applications.
- AC-DC Inverters
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Refrigerator
- Solar inverters
- Isolated Supplies for Motor Control
- Solar power supplies
- Industrial Power Supplies
- Power factor correction (PFC) circuits
- 3-Phase Motor Inverter Driver
- Multicolor LED/laser displays
