TC4427AEPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 12Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Base Part Number | TC4427A |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 17.975V |
| Max Output Current | 1.5A |
| Nominal Supply Current | 4.5mA |
| Power Dissipation | 730mW |
| Output Current | 1.5A |
| Max Supply Current | 2mA |
| Propagation Delay | 35 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 35 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Input Bias Current | 10μA |
| Turn On Time | 0.045 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.045 μs |
| Height | 4.953mm |
| Length | 10.16mm |
| Width | 7.112mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4427AEPA Overview
Gate drivers provides greater flexibilGate driversy to use the 8-DIP (0.300, 7.62mm) package.A package of Tube has been used.In this case, gate drivers is mounted along the way of Through Hole.In the absence of a 4.5V~18V supply voltage, its superiority can be demonstrated.This device is designed with a N-Channel, P-Channel MOSFET gate type.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.The input type is Non-Inverting.Mosfet driver is based on 8 terminations.You will find various related parts under the base part number TC4427A.Devices are mounted by Through Hole.The pins are configured with 8 when designing the chip.Mosfet driver utilizes the interface IC BUFFER OR INVERTER BASED MOSFET DRIVER.1.5A is the maximum output current.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.A total of 8 pins are available for component connections.The basis has 2 integrated outputs.Mosfet driver supports an output current of 1.5A.Using 730mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.The supply current should be kept at 2mA to ensure higher stability.When this voltage is produced, it is marked as 17.975V.Resistance 12Ohm is used for operation.
TC4427AEPA Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
Resistance of 12Ohm
TC4427AEPA Applications
There are a lot of Microchip Technology TC4427AEPA gate drivers applications.
- Motor Controls
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Portable Navigation Devices
- Smart Phones
- High frequency line drivers
- Portable computers
- A/D drivers
- AC-DC Inverters
- Video amplifiers
- Automotive Applications
