TC4427COA713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4427 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Interface | I2C, SPI, USART |
| Nominal Supply Current | 4.5mA |
| RAM Size | 368B |
| Memory Type | FLASH |
| Power Dissipation | 470mW |
| Max Supply Current | 4.5mA |
| Propagation Delay | 50 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ns |
| Watchdog Timer | Yes |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Rise Time | 19ns |
| Fall Time (Typ) | 19 ns |
| Core Architecture | PIC |
| Rise / Fall Time (Typ) | 19ns 19ns |
| Max Frequency | 20MHz |
| Channel Type | Independent |
| Number of Programmable I/O | 22 |
| Number of Drivers | 2 |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.06 μs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4427COA713 Overview
A higher degree of flexibility is achieved by adopting its 8-SOIC (0.154, 3.90mm Width) package.There is a package in the form of Cut Tape (CT).There are 2 drivers installed for this device.Surface Mount is the way in which it is mounted.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~18V supply voltage.A gate type of N-Channel, P-Channel MOSFET is used in its design.This device is allowed to operate in a temperature range of 0°C~150°C TJ.A type of Non-Inverting is used for input in this program.The configuration starts with 8 terminations.Numerous related parts can be found under its base part number TC4427.Mosfet driver is mounted using Surface Mount.Mosfet driver is configured wMosfet driverh 8 pins when designing.An output current as high as 1.5A can be achieved at maximum power.This subcategory of MOSFET Drivers has a number of useful electronic components.The number of component pins is 8.According to its maximum power dissipation, 470mW is capable of conducting and transferring a large amount of power without overheating.The supply current should be kept at 4.5mA to ensure higher stability.
TC4427COA713 Features
Embedded in the Cut Tape (CT) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC4427COA713 Applications
There are a lot of Microchip Technology TC4427COA713 gate drivers applications.
- High frequency line drivers
- Active Clamp Flyback or Forward and Synchronous Rectifier
- High-speed communications
- DC/DC converters
- Telecom switch mode power supplies
- Power factor correction (PFC) circuits
- Isolated Gate Driver Supplies
- Active filtering
- AC-DC Inverters
- RGB applications
