TC4427CPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 12Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Base Part Number | TC4427 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 18V |
| Max Output Current | 1.5A |
| Nominal Supply Current | 4.5mA |
| Power Dissipation | 730mW |
| Output Current | 1.5A |
| Max Supply Current | 4.5mA |
| Propagation Delay | 50 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ns |
| Max Output Voltage | 17.975V |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 19ns 19ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Input Bias Current | 10μA |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.06 μs |
| Height | 4.06mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4427CPA Overview
A higher level of flexibility is provided by its 8-DIP (0.300, 7.62mm) package.Tube is the packaging method.Its recommended mounting way is Through Hole.A supply voltage of 4.5V~18V demonstrates its superiority.Gate drivers is designed wGate driversh a N-Channel, P-Channel MOSFET gate.Temperature range 0°C~150°C TJ is allowed for this device.Mosfet driver accepts input of type Non-Inverting.Its configuration starts with 8 terminations.Numerous related parts can be found under its base part number TC4427.The device is mounted using Through Hole.In the device, there are 8 pins.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.The maximum output current can amount to 1.5A.There are several useful electronic components in this subcategory of MOSFET Drivers.A board with 8 component pins is available.Mosfet driver has been integrated wMosfet driverh a total of 2 outputs for Mosfet drivers basis.The output current of this device can be set to 1.5A.Using 730mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.Mosfet gate drivers is recommended that you keep the supply current at 4.5mA in order to achieve greater stabilMosfet gate driversy.In this case, it outputs 18V voltage.This device requires a resistance value of 12Ohm.In general, it is recommended to keep the maximum output voltage at 17.975V.
TC4427CPA Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
Resistance of 12Ohm
TC4427CPA Applications
There are a lot of Microchip Technology TC4427CPA gate drivers applications.
- RGB applications
- AC-DC Inverters
- Isolated Supplies for controller area network (CAN),
- Video amplifiers
- Pulse transformer drivers
- 3-Phase Motor Inverter Driver
- Automotive Applications
- Topologies
- Power factor correction (PFC) circuits
- DC/DC converters
