TC4427EMF713
| Parameters | |
|---|---|
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 30ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 19ns 19ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.06 μs |
| Height Seated (Max) | 0.95mm |
| Length | 6mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4427 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Nominal Supply Current | 4.5mA |
| Max Supply Current | 4.5mA |
| Propagation Delay | 50 ns |
TC4427EMF713 Overview
A higher degree of flexibility is achieved by adopting its 8-VDFN Exposed Pad package.The packaging method is indicated by Tape & Reel (TR).For its configuration, it incorporates 2 drivers.The device is mounted in the direction of Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~18V supply voltage.Gate type N-Channel, P-Channel MOSFET has been used in its design.The allowable temperature range that this device can be operated in is -40°C~150°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.Mosfet driver is possible to find various related parts under Mosfet drivers base part number TC4427.Mosfet driver is mounted using the Surface Mount method.When the device is designed, it has 8 pins.There is an interface IC called BUFFER OR INVERTER BASED MOSFET DRIVER that is employed in this device.The maximum output current can amount to 1.5A.Several electronic components are included in its subcategory of MOSFET Drivers.A total of 8 pins are available for component connections.Mosfet gate drivers is recommended to keep the supply current at 4.5mA to ensure greater stabilMosfet gate driversy.
TC4427EMF713 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
TC4427EMF713 Applications
There are a lot of Microchip Technology TC4427EMF713 gate drivers applications.
- DC/DC converters
- LCD/LCoS/DLP portable and embedded pico projectors
- Active filtering
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Broadcast equipment
- General Purpose 3-Phase Inverter
- Isolated Gate Driver Supplies
- Uninterruptible Power Supplies (UPS)
- Portable computers
- Isolated switch mode power supplies (SMPS)
