TC4427EPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 12Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Base Part Number | TC4427 |
| Pin Count | 8 |
| Output Voltage | 25mV |
| Max Output Current | 1.5A |
| Nominal Supply Current | 4.5mA |
| Power Dissipation | 730mW |
| Output Current | 1.5A |
| Max Supply Current | 4.5mA |
| Propagation Delay | 50 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 20ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 19ns 19ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Input Bias Current | 10μA |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.06 μs |
| Height | 4.95mm |
| Length | 10.16mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4427EPA Overview
Its 8-DIP (0.300, 7.62mm) package provides greater flexibility.Tube is the packaging method.Gate drivers is configured wGate driversh 2 drivers.The device is mounted in the direction of Through Hole.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~18V supply voltage.A gate type of N-Channel, P-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Non-Inverting is used as its input type.8 terminations constitute its foundation.The base part number TC4427 refers to a number of related parts.In this case, Through Hole indicates how the device is to be mounted.During design, it is configured with 8 pins.Mosfet driver utilizes the interface IC BUFFER OR INVERTER BASED MOSFET DRIVER.Mosfet driver is possible to achieve a maximum output current of 1.5A.This subcategory of MOSFET Drivers has a number of useful electronic components.On the board, there are 8 component pins.Mosfet driver supports an output current of 1.5A.730mW dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.In order to ensure greater stability, it is recommended to keep the supply current at 4.5mA.25mV is the output voltage.For this device to function, a resistance value of 12Ohm is required.
TC4427EPA Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
Resistance of 12Ohm
TC4427EPA Applications
There are a lot of Microchip Technology TC4427EPA gate drivers applications.
- Pulse transformer drivers
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Automotive Applications
- AC-DC Inverters
- DC-DC Converters
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- UPS systems
- Head-up and Head mounted displays
- Portable Navigation Devices
- Solar power supplies
